How to change Engine Oil and Filter on Peugeot 3008?

The average cost for a Peugeot 3008 oil and filter change is between $176 and $211. Labor costs are estimated between $61 and $78 while parts are priced at $115. This range does not include taxes and fees, and does not factor in your specific vehicle or location.

The Peugeot 3008 is a comfortable and stylish SUV that’s perfect for the whole family. But like all vehicles, it needs regular maintenance to keep it running smoothly. One of the most important maintenance tasks for any car is an oil and filter change.

While you could take your Peugeot 3008 to a dealership or local mechanic for an oil change, it’s just as easy (and often cheaper) to do it yourself. This article will walk you through the steps of changing the oil and filter on your Peugeot 3008, so you can keep your car running like new.

  • What You’ll Need:
  • – Oil (check your owner’s manual for the recommended type)
  • – Oil filter (again, consult your owner’s manual)
  • – Funnel (optional but helpful)
  • – Jack and jack stands (or a ramp if you have one)
  • – Wrench or socket set (to remove oil drain plug and old filter)

How to change Engine Oil and Filter on Peugeot 3008?

Estimate Cost : 120 USD

Time Needed : 0 days 0 hours 7 minutes

It is important to change the engine oil in your Peugeot 3008 on a regular basis in order to keep it running smoothly and efficiently. Depending on how often you use your vehicle, you will need to change the oil every 3,000-5,000 miles or every 6 months, whichever comes first.

  1. Step 1

    - s4Start by parking your Peugeot 3008 on a level surface and engage the parking brake. Place a clean catch basin underneath the drain plug located at the bottom of the oil pan. You may also want to place a funnel in the opening of the drain plug to make things easier.

  2. Step 2

    - s5Using a wrench or socket set, loosen and remove the drain plug from the bottom of the oil pan and allow all of the old oil to drain out completely into the catch basin. Once all of the old oil has drained out, replace and tighten back up the drain plug. Do not over tighten!

  3. Step 3

    - s8Next locate and remove the old oil filter from its housing on top of The easiest way to do this is by using an Oil Filter Wrench; however, if you do not have one available, you can carefully use a pair of pliers instead. Be careful not to damage either 4the filter housing or surrounding areas when removing 5the old filter .

  4. Step 4

    - s13Remove the filter element from the filter housing.Put the old filter cartridge in the container.

  5. Step 5

    - s14Cover the oil filter housing with a microfibre towel to prevent dirt and foreign objects from getting into the system.

  6. Step 6

    - s15Unscrew the oil filler plug.

  7. Step 7

    - s17Lift the car using a jack or place it over an inspection pit. Put a waste oil container with at least 5 l capacity under the drainage hole.

  8. Step 8

    - s19Unscrew the drain plug.Use HEX No.H8. Drain the used oil.

  9. Step 9

    - s21Clean the area of the oil pan drainage hole. Screw in the new drainage plug and tighten it. Use HEX No.H8.Use a torque wrench.Tighten it to 30 Nm torque. Remove the oil filter cover O-ring.Use a flat screwdriver.

  10. Step 10

    - s25Install a new O-ring to its mounting seat on the filter cover. Lubricate the rubber seal of the new filter with a little amount of fresh oil. Remove the microfibre towel from the oil filter housing.

  11. Step 11

    - s29Screw the cap.Use a torque wrench.Use a drive socket #27.Tighten it to 25 Nm torque. Connect the air intake pipe to the air filter housing. Tighten the clamp and fasteners on the air filter intake pipe.Use a combination spanner #7.Use a drive socket #10.

  12. Step 12

    - s33Connect the charger intake hose to the air filter housing.Tighten the binding clamps that attach the air duct to the air filter housing and to the charger.Use a combination spanner #7.
    Connect the crankcase ventilation hose to the air duct.

  13. Step 13

    - s35Connect the vacuum sensor. Squeeze the clamp with combination pliers and connect the vacuum valve hose. Unscrew the oil filler plug. Insert the funnel. Pour oil into the engine through the filler.Required amount of oil: 4.25 l.

  14. Step 14

    - s40Check the oil level using the dipstick.Top up oil if necessary. Tighten the oil filler cap. Run the engine for a few minutes.After the oil pressure warning light goes out, stop the engine. Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary.

Tools
  • -4.5 litres of new motor oil (meeting ACEA A5/B5 specifications)
  • A new oil filter
  • A wrench or socket set to remove the old filter
  • A clean catch basin or pan to catch the old oil
  • Funnel (optional)
Materials
  • Combination spanner №7
  • HEX bit No.H8.
  • Oil drain pan
  • Microfibre towel
  • Impact socket №10
  • Combination pliers
  • Impact socket №27

What is the service intervals for a Peugeot 3008?

The Peugeot 3008 is a popular SUV that offers great performance and reliability. To ensure your vehicle remains in top condition, it is important to follow the manufacturer’s recommended service intervals.

For the Peugeot 3008, these intervals are as follows:

  • Every 10,000 miles or 12 months (whichever comes first) – oil and filter change, air filter check/replacement, brake fluid check/replacement, spark plug replacement (if applicable), coolant level check/top-u
  • Every 20,000 miles or 24 months (whichever comes first) – oil and filter change, air filter check/replacement, brake fluid check/replacement, spark plug replacement (if applicable), coolant level check/top-up.
  • Every 30,000 miles or 36 months (whichever comes first) – oil and filter change, air filter check/replacement, brake fluid check/replacement , spark plug replacement (if applicable), coolant level check/top-up.

It is also important to have your vehicle inspected regularly by a qualified mechanic for any potential problems that may arise over time. This will help you identify any issues before they become more serious and costly to repair. Additionally, regular maintenance can help extend the life of your vehicle and keep it running smoothly for years to come.

What oil does a Peugeot 3008 1.6 petrol take?

The Peugeot 3008 1.6 petrol engine requires 5W-30 oil for optimal performance. This type of oil is a synthetic blend that provides superior protection against wear and tear, as well as improved fuel economy. It also helps to reduce emissions and improve the overall efficiency of the engine. When changing the oil in your Peugeot 3008 1.6 petrol, it is important to use only high quality oils that meet or exceed the manufacturer’s specifications. Using an inferior grade of oil can cause damage to your engine over time and may even void any warranty coverage you have on your vehicle.

When selecting an oil for your Peugeot 3008 1.6 petrol, it is important to consider both its viscosity rating and its API classification level (American Petroleum Institute). The viscosity rating should be 5W-30, while the API classification should be at least SM/CF or higher (the higher the better). Additionally, look for oils that are labeled “energy conserving” or “fuel efficient” as these will help maximize fuel economy while still providing adequate protection for your engine components.

What is the oil capacity of the Peugeot 3008?

The oil capacity of the Peugeot 3008 depends on which engine it has. The 1.6L petrol engine requires 4.2 litres (4.4 US quarts) of 5W-30 or 10W-40 motor oil, while the 2.0L diesel engine needs 6 litres (6.3 US quarts) of 5W-30 or 10W-40 motor oil to fill up its sump completely. It’s important to note that these figures are based on an empty filter and dry sump system; if you’re replacing your filter as well, then you’ll need to add an extra 0.5 litre (0.53 US quart).

Peugeot 5008 oil filter location

The oil filter on your Peugeot 5008 is located in the engine bay, near the front of the car. To access it, you will need to open up the hood and locate the black plastic cover that covers part of the engine block. This cover should have two clips at either side which can be released with a flathead screwdriver or similar tool. Once these clips are removed, you will be able to lift off this cover and see where your oil filter is located.

What oil does a Peugeot 3008 take?

The Peugeot 3008 is a popular compact crossover SUV that has been in production since 2009. It is known for its stylish design, comfortable interior, and reliable performance. As with any vehicle, it is important to use the correct oil to ensure optimal engine performance and longevity.

So what oil does a Peugeot 3008 take? The recommended oil for the Peugeot 3008 is 5W-30 synthetic motor oil. This type of oil provides superior protection against wear and tear on your engine components while also providing excellent fuel economy. Synthetic oils are designed to last longer than conventional oils, so you won’t need to change your oil as often.

Additionally, synthetic oils can help reduce emissions from your vehicle by reducing friction between moving parts in the engine. When changing the oil in your Peugeot 3008, make sure you use an approved filter as well as the correct amount of new oil specified by the manufacturer’s guidelines. You should also check all other fluids such as coolant and brake fluid levels before starting your car after an oil change.

Finally, be sure to dispose of used motor oil properly at a certified recycling center or auto parts store near you. By following these simple steps and using the right type of motor oil for your Peugeot 3008, you can keep your vehicle running smoothly for years to come!

How much oil does a Peugeot 3008 take?

The Peugeot 3008 is a popular compact crossover SUV that has been in production since 2009. It is known for its stylish design, comfortable interior, and reliable performance. When it comes to oil changes, the Peugeot 3008 requires 5.5 liters (5.9 quarts) of engine oil for an oil change with filter replacement. This amount may vary slightly depending on the type of engine and other factors such as driving conditions and climate.

5/5 - (3 votes)
Photo of author

OilChanged Staff

Yigit AKSÜT

Hi, my name is Yiğit AKSÜT and I am a car mechanicer. I have always been fascinated by cars and how they work, and I knew from a young age that I wanted to make a career out of working on them. After completing my education and training, I began working as a mechanic and have been doing so for several years now.I have a strong passion for cars and love the challenge of diagnosing and fixing problems. I take pride in my work and always strive to do the best job possible for my clients. In my free time, I enjoy tinkering with cars and learning about new technologies and techniques in the automotive industry.

1 thought on “How to change Engine Oil and Filter on Peugeot 3008?”

Leave a Comment